Please use this identifier to cite or link to this item: http://repositorio.uptc.edu.co/handle/001/2160
Full metadata record
DC FieldValueLanguage
dc.contributor.authorArias Torres, Sandra Milena-
dc.contributor.authorGómez Botero, Maryory Astrid-
dc.contributor.authorCorrea Bedoya, Esteban-
dc.contributor.authorEcheverría Echeverría, Félix-
dc.contributor.authorCastaño Gonzalez, Juan Guillermo-
dc.date.accessioned2018-09-07T15:09:41Z-
dc.date.available2018-09-07T15:09:41Z-
dc.date.issued2018-01-01-
dc.identifier.citationArias Torres, S. M y otros. (2018). Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating. Revista Facultad de Ingeniería, 27(47), 103-110. https://doi.org/10.19053/01211129.v27.n47.2018.7927. http://repositorio.uptc.edu.co/handle/001/2160spa
dc.identifier.issn2357-5328-
dc.identifier.urihttp://repositorio.uptc.edu.co/handle/001/2160-
dc.description1 recurso en línea (páginas 101-110).spa
dc.description.abstractLos recubrimientos autocatalíticos de níquel-boro son utilizados en diferentes industrias para mejorar las propiedades mecánicas de materiales, como la dureza y la resistencia al desgaste. En esta investigación se evaluaron las propiedades tribológicas de recubrimientos autocatalíticos Ni-B depositados sobre acero al carbono AISI/SAE 1018 antes y después de aplicar un tratamiento térmico a 450 °C durante 1 hora. Adicionalmente, se realizaron ensayos tribológicos por deslizamiento en seco, utilizando una carga de 5 N y una velocidad de deslizamiento de 0.012 m/s, en un tribómetro ball-on-disk fabricado por el CIDEMAT de acuerdo con la norma ASTM G99. De acuerdo con la evaluación tribológica, se estableció que el tratamiento térmico aplicado mejora significativamente el rendimiento tribológico de los recubrimientos autocatalíticos Ni-B.spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherUniversidad Pedagógica y Tecnológica de Colombiaspa
dc.relation.ispartofseriesRevista Facultad de Ingeniería;Volumen 27, número 47 (Enero-Abril 2018)-
dc.rightsCopyright (c) 2018 Universidad Pedagógica y Tecnológica de Colombiaspa
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/spa
dc.sourcehttps://revistas.uptc.edu.co/index.php/ingenieria/article/view/7927/6274spa
dc.titleEffect of heat treatment on the tribological properties of Nickel-Boron electroless coatingspa
dc.title.alternativeEfecto del tratamiento térmico sobre las propiedades tribológicas del recubrimiento autocatalítico níquel-borospa
dc.title.alternativeEfeito do tratamento térmico sobre as propriedades tribológicas do recobrimento autocatalítico níquel-borospa
dc.typeArtículo de revistaspa
dcterms.bibliographicCitationP. M. K. K. Hari Krishnan, S. John, K. N. Srinivasan, J. Praveen, and M. Ganesan, “An overall aspect of electroless Ni-P depositions – A review article,” Metall. Mater. Trans. A, vol. 37(6), p. 10, 2006. DOI: http://doi.org/10.1007/s11661-006-0134-7.spa
dcterms.bibliographicCitationG. O. Mallory, and J. B. Hajdu, Electroless Plating: Fundamentals and Applications, Noyes Publ. New York, 1990.spa
dcterms.bibliographicCitationB. G. B. Oraon, and G. Majumdar, “Parametric optimization and prediction of electroless Ni-B deposition,” Mater. Des., vol. 28(7), pp. 2138- 2147, Jan. 2007. DOI: http://doi.org/10.1016/j. matdes.2006.05.017.spa
dcterms.bibliographicCitationF. Delaunois, and P. Lienard, “Heat treatments for electroless nickel–boron plating on aluminium alloys,” Surf. Coatings Technol., vol. 160 (2-3), pp. 239-248, Oct. 2002. DOI: http://doi.org/10.1016/ S0257-8972(02)00415-2.spa
dcterms.bibliographicCitationP. Sahoo, and S. K. Das, “Tribology of electroless nickel coatings – A review,” Mater. Des., vol. 32 (4), pp. 1760-1775, Apr. 2011. DOI: http://doi. org/10.1016/j.matdes.2010.11.013.spa
dcterms.bibliographicCitationC. Dervos, J. Novakovic, and P. Vassiliou, “Vacuum heat treatment of electroless Ni–B coatings,” Mater. Lett., vol. 58 (5), pp. 619-623, Feb. 2004. DOI: http:// doi.org/10.1016/S0167-577X(03)00581-0.spa
dcterms.bibliographicCitationS. Eraslan, and M. Ürgen, “Oxidation behavior of electroless Ni–P, Ni–B and Ni–W–B coatings deposited on steel substrates,” Surf. Coatings Technol., vol. 265, pp. 46–52, Mar. 2015. DOI: http://doi.org/10.1016/j.surfcoat.2015.01.064.spa
dcterms.bibliographicCitationK. Krishnaveni, T. S. N. Sankara Narayanan, and S. K. Seshadri, “Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance,” Surf. Coatings Technol., vol. 190(1), pp. 115–121, Jan. 2005. DOI: http://doi.org/10.1016/j. surfcoat.2004.01.038.spa
dcterms.bibliographicCitationT. S. N. S. Narayanan, K. Krishnaveni, and S. K. Seshadri, “Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance,” Mater. Chem. Phys., vol. 82(3), pp. 771-779, Dec. 2003. DOI: http://doi. org/10.1016/S0254-0584(03)00390-0.spa
dcterms.bibliographicCitationK. Krishnaveni, T. S. N. Sankara Narayanan, and S. K. Seshadri, “Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance,” Mater. Chem. Phys., vol. 99(2-3), pp. 300–308, Oct. 2006. DOI: http://doi.org/10.1016/j. matchemphys.2005.10.028.spa
dcterms.bibliographicCitationD. C. Vitry, and F. Delaunois F., “How heat treatment can give better properties to electroless nickel- boron coatings,” La Metallurgia Italiana. Mons, Belgium, p. 6, 2009.spa
dcterms.bibliographicCitationV. Niksefat, and M. Ghorbani, “Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni–B-TiO2 composite coatings,” J. Alloys Compd., vol. 633, pp. 127- 136, Jun. 2015. DOI: http://doi.org/10.1016/j. jallcom.2015.01.250.spa
dcterms.bibliographicCitationY. Wang, S.-J. Wang, X. Shu, W. Gao, W. Lu, and B. Yan, “Preparation and property of sol-enhanced Ni- B-TiO2 nano-composite coatings,” J. Alloys Compd., vol. 617, pp. 472–478, Dec. 2014. DOI: http://doi. org/10.1016/j.jallcom.2014.08.060.spa
dcterms.bibliographicCitationE. Correa, Direct deposition of electroless Nickel- Boron coatings on magnesium alloys, Universidad de Antioquia, Medellín, 2013.spa
dcterms.bibliographicCitationASTM, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. United States, 2017, p. 6.spa
dcterms.bibliographicCitationV. Vitry, Electroless nickel-boron deposits: Synthesis, formation and characterization; Effect of heat treatments; Analytical modeling of the structural state, Université de Mons, Bélgica, 2009.spa
dcterms.bibliographicCitationA.-F. Kanta, V. Vitry, and F. Delaunois, “Wear and corrosion resistance behaviours of autocatalytic electroless plating,” Journal of Alloys and Compounds, vol. 486 (1-2). pp. L21-L23, Nov. 2009. DOI: http://doi.org/10.1016/j.jallcom.2009.07.038.spa
dc.description.notesBibliografía: página 110.spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.type.dcmi-type-vocabularyTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa
dc.description.abstractenglishNickel-Boron autocatalytic coatings are widely used in several industries to improve mechanical properties of materials such as hardness and wear resistance. Tribological properties were evaluated in Ni-B autocatalytic coatings deposited on AISI/SAE 1018 carbon steel before and after a heat treatment at 450 °C for one hour. Tribological tests were carried out by dry sliding, using a load of 5 N and a sliding speed of 0.012 m/s, in a homemade ball-on-disk tribometer, which followed ASTM G99 standard. According to the tribological evaluation, the heat treatments applied to Ni-B coatings improved their tribological performance. This research corroborates that by applying an adequate heat treatment, hardness and wear resistance of Ni-B coatings can be improved significantly.spa
dc.description.abstractportuguesOs recobrimentos autocatalíticos de níquel-boro são utilizados em diferentes indústrias para melhorar as propriedades mecânicas de materiais, como a dureza e a resistência ao desgaste. Nesta pesquisa avaliaram-se as propriedades tribológicas de recobrimentos autocatalíticos Ni-B depositados sobre aço ao carbono AISI/SAE 1018 antes e depois de aplicar um tratamento térmico a 450 °C durante 1 hora. Adicionalmente, realizaram-se ensaios tribológicos por deslizamento em seco, utilizando uma carga de 5 N e uma velocidade de deslizamento de 0.012 m/s, em um tribômetro ball-on-disk fabricado pelo CIDEMAT de acordo com a norma ASTM G99. De acordo com a avaliação tribológica, estabeleceu-se que o tratamento térmico aplicado melhora significativamenteo rendimento tribológico dos recobrimentos autocatalíticos Ni-B.spa
dc.identifier.doihttps://doi.org/10.19053/01211129.v27.n47.2018.7927-
dc.rights.creativecommonsAtribución-NoComercialspa
dc.subject.armarcAutocatalytic coatings-
dc.subject.armarcPhosphate coating-
dc.subject.proposalElectrolessspa
dc.subject.proposalHeat treatmentspa
dc.subject.proposalNi-B coatingspa
dc.subject.proposalTribological propertiesspa
Appears in Collections:Revista Facultad de Ingeniería

Files in This Item:
File Description SizeFormat 
PPS-882.pdfArchivo principal1.05 MBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons