Please use this identifier to cite or link to this item: http://repositorio.uptc.edu.co/handle/001/2167
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLlano Sánchez, Luis Eduardo-
dc.contributor.authorDomínguez Cajeli, Darío Manuel-
dc.contributor.authorRuiz Cárdenas, Luis Carlos-
dc.date.accessioned2018-09-10T15:49:54Z-
dc.date.available2018-09-10T15:49:54Z-
dc.date.issued2018-01-01-
dc.identifier.citationLlano Sánchez, L. E., Domínguez Cajeli, D. M. & Ruiz Cárdenas, L. C. (2018). Thermal transfer analysis of tubes with extended surface with fractal design. Revista Facultad de Ingeniería, 27(47), 31-37. https://doi.org/10.19053/01211129.v27.n47.2018.7749. http://repositorio.uptc.edu.co/handle/001/2167spa
dc.identifier.issn2357-5328-
dc.identifier.urihttp://repositorio.uptc.edu.co/handle/001/2167-
dc.description1 recurso en línea (páginas 31-37).spa
dc.description.abstractLos intercambiadores de calor están conformados por tubos con superficies extendidas, con el propósito de mejorar la transferencia de calor entre dos medios, que pueden ser un sólido y un líquido en movimiento. En el presente trabajo se expone el diseño que se llevó a cabo de un tubo de superficie extendida con geometría fractal, correspondiente al copo de Koch y la curva de Cesaro, con la herramienta computacional CAD, para luego realizar el análisis por elementos finitos CAE y verificar el comportamiento térmico del tubo diseñado. Se logró obtener como resultado reducir el tiempo de transferencia de calor y aumentar el flujo de calor en el sistema del modo siguiente: para tubo liso, 250 W/m2; para superficie de Koch, 500 W/m2; para seis aletas, 1450 W/m2, y, finalmente, para curva de Cesaro, 3600 W/m2. Todo ello, permitió evidenciar los límites del diseño y las ventajas que pueden llegar a tener respecto a su implementación en maquinarias como condensadores, intercambiadores de calor y calderas.spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherUniversidad Pedagógica y Tecnológica de Colombiaspa
dc.relation.ispartofseriesRevista Facultad de Ingeniería;Volumen 27, número 47 (Enero-Abril 2018)-
dc.rightsCopyright (c) 2018 Universidad Pedagógica y Tecnológica de Colombiaspa
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/spa
dc.sourcehttps://revistas.uptc.edu.co/index.php/ingenieria/article/view/7749/6139spa
dc.titleThermal transfer analysis of tubes with extended surface with fractal designspa
dc.title.alternativeAnálisis de transferencia térmica de tubos con superficies extendidas con diseño fractalspa
dc.title.alternativeAnálise de transferência térmica de tubos com superfícies estendidas com desenho fractalspa
dc.typeArtículo de revistaspa
dcterms.bibliographicCitationR. Senthilkumar, S. Prabhu, and M. Cheralathan, “Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces,” Applied Thermal Engineering, vol. 50(1), pp. 1361-1368, Jan. 2013. DOI: DOI: http://doi.org/10.1016/j. applthermaleng.2012.05.040.spa
dcterms.bibliographicCitationS. W. Chang, W. L. Cai, and R. S. Syu, “Heat transfer and pressure drop measurements for tubes fitted with twin and four twisted fins on rod,” Experimental Thermal and Fluid Science, vol. 74, pp. 220-234, Jun. 2016. DOI: DOI: http://doi.org/10.1016/j. expthermflusci.2016.01.001.spa
dcterms.bibliographicCitationB. Niezgoda – Zelasko, and J. Zelasko, “Refrigerant boiling at low heat flux in vertical tubes with heat transfer enhancing fittings,” International Journal of Refrigeration, vol. 54, pp. 151-169, Jun. 2015. DOI: http://doi.org/10.1016/j.ijrefrig.2015.03.007.spa
dcterms.bibliographicCitationE. Gkanas, and Makridis, “Effective thermal management of a cylindrical MgH2 tank including thermal coupling with an operating SOFC and the usage of extended surfaces during the dehydrogenation process,” International Journal of Hydrogen Energy, vol. 41(13), pp. 5693-5708, Apr. 2016. DOI: http:// doi.org/10.1016/j.ijhydene.2016.01.165.spa
dcterms.bibliographicCitationH. W. Carpenter, and R. G. Reid, “The response of layered anisotropic tubes to centrifugal loading,” Composite Structures, vol. 139, pp. 141- 150, Apr. 2016. DOI: http://doi.org/10.1016/j. compstruct.2015.11.071.spa
dcterms.bibliographicCitationK. Yang, S. Xu, J. Shen, S. Zhou, and Y. M. Xie, “Energy absorption of thin-walled tubes with prefolded origami patterns: Numerical simulation and experimental verification,” Thin-Walled Structures, vol. 103, pp. 33-44, Jun. 2016. DOI: http://doi. org/10.1016/j.tws.2016.02.007.spa
dcterms.bibliographicCitationR. Romero-Méndez, P. Lara-Vázquez, F. Oviedo- Tolentino, H. M. Durán-García, F. G. Pérez- Gutiérrez, and A. Pacheco-Vega, “Use of Artificial Neural Networks for Prediction of the Convective Heat Transfer Coefficient in Evaporative Mini- Tubes,” Ingeniería, Investigación y Tecnología, vol. 17(1), pp. 23-34, Jan. 2016. DOI: http://doi. org/10.1016/j.riit.2016.01.003.spa
dcterms.bibliographicCitationS. Jedari Salami, “Extended high order sandwich panel theory for bending analysis of sandwich beams with carbon nanotube reinforced face sheets,” Physica E: Low-dimensional Systems and Nanostructures, vol. 76, pp. 187-197, Feb. 2016. DOI: http://doi.org/10.1016/j.physe.2015.10.015.spa
dcterms.bibliographicCitationS. Rimza, K. Satpathy, S. Khirwadkar, and K. Velusamy, “Optimal design of divertor heat sink with different geometric configurations of sectorial extended surfaces,” Fusion Engineering and Design, vol. 100, pp. 581-595, Nov. 2015. DOI: http://doi. org/10.1016/j.fusengdes.2015.08.008.spa
dcterms.bibliographicCitationB. Anoop, C. Balaji, Velusamu, and K. Velusamy, “A characteristic correlation for heat transfer over serrated finned tubes,” Annals of Nuclear Energy, vol. 85, pp. 1052-1065, Nov. 2015. DOI: http://doi. org/10.1016/j.anucene.2015.07.025.spa
dcterms.bibliographicCitationP. A. Di Maio, P. Arena, G. Bongiovi, P. Chiovaro, A. del Nevo, and R. Forte, “Optimization of the breeder zone cooling tubes of the DEMO Water- Cooled Lithium Lead breeding blanket,” Fusion Engineering and Design, vol. 109-111(A), pp. 227-231, Nov. 2016. DOI: http://doi.org/10.1016/j. fusengdes.2016.03.021.spa
dcterms.bibliographicCitationS. Mirfendereski, A. Abbassi, and M. Saffar - Avval, “Experimental and numerical investigation of nanofluid heat transfer in helically coiled tubes at constant wall heat flux,” Advanced Powder Technology, vol. 26(5), pp. 1483-1494, Sep. 2015. DOI: http://doi.org/10.1016/j.apt.2015.08.006.spa
dcterms.bibliographicCitationD. J. Kukulka, and R. Smith, “Thermal-hydraulic performance of Vipertex 1EHT enhanced heat transfer tubes,” Applied Thermal Engineering, vol. 61(1), pp. 60-66, Oct. 2013. DOI: http://doi. org/10.1016/j.applthermaleng.2012.12.037.spa
dcterms.bibliographicCitationJ. Yan, Q. Bi, G. Zhu, L. Cai, Q. Yuan, and H. Lv, “Critical heat flux of highly subcooled water flow boiling in circular tubes with and without internal twisted tapes under high mass fluxes,” International Journal of Heat and Mass Transfer, vol. 95, pp. 606-619, Apr. 2016. DOI: http://doi.org/10.1016/j. ijheatmasstransfer.2015.12.024.spa
dcterms.bibliographicCitationJ. Yan, Q. Bi, L. Cai, G. Zhu, and Q. Yuan, “Subcooled flow boiling heat transfer of water in circular tubes with twisted-tape inserts under high heat fluxes,” Experimental Thermal and Fluid Science, vol. 68, pp. 11-21, Nov. 2015. DOI: http://doi.org/10.1016/j. expthermflusci.2015.04.003.spa
dcterms.bibliographicCitationB. Li, X. Han, Z. Wan, X. Wang, and Y. Tang, “Influence of ultrasound on heat transfer of copper tubes with different surface characteristics in subcooled boiling,” Applied Thermal Engineering, vol. 92, pp. 93-103, Jan. 2016. DOI: http://doi. org/10.1016/j.applthermaleng.2015.09.069.spa
dcterms.bibliographicCitationV. Garcia-Morales, “Fractal surfaces from simple arithmetic operations,” Physica A: Statistical Mechanics and its Applications, vol. 447, pp. 535- 544, Apr. 2016. DOI: http://doi.org/10.1016/j. physa.2015.12.028.spa
dcterms.bibliographicCitationI. M. Rian, and S. Asayama, “Computational Design of a nature-inspired architectural structure using the concepts of self-similar and random fractals,” Automation in Construction, vol. 66, pp. 43-58, Jun. 2016. DOI: http://doi.org/10.1016/j. autcon.2016.03.010.spa
dcterms.bibliographicCitationH. Khezrzadeh, “Overall properties of particulate composites with fractal distribution of fibers,” Mechanics of Materials, vol. 96, pp. 1-11, May. 2016. DOI: http://doi.org/10.1016/j.mechmat.2016.01.014.spa
dcterms.bibliographicCitationG. Pia, L. Casnedi, R. Ricciu, L. A. Besalduch, O. Cocco, A. Murru, Paola Meloni, and U. Sanna, “Thermal properties of porous stones in cultural heritage: Experimental findings and predictions using an intermingled fractal units model,” Energy and Buildings, vol. 118, pp. 232-239, Apr. 2016. DOI: http://doi.org/10.1016/j.enbuild.2016.03.011.spa
dcterms.bibliographicCitationN. Nagarani, K. Mayilsamy, A. Murugesan, and G. Sathesh Kumar, “Review of utilization of extended surfaces in heat transfer problems,” Renewable and Sustainable Energy Reviews, vol. 29, pp. 604- 613, Jan. 2014. DOI: http://doi.org/10.1016/j. rser.2013.08.068.spa
dcterms.bibliographicCitationM. L. Lapidus, and R. G. Niemeyer, “Towards the Koch Snowflake Fractal Billard: Computer Experiments and Mathematical Conjectures,” Contemporary Mathematics, vol. 517, pp. 231- 265, Jan. 2010. DOI: http://doi.org/10.1090/ conm/517/1014.spa
dc.description.notesBibliografía: páginas 36-37.spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.type.dcmi-type-vocabularyTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa
dc.description.abstractenglishHeat exchangers are formed by tubes with extended surfaces that improve the transfer of heat between two media (e.g., a solid and a liquid in motion). This paper presents the design of an extended surface tube with fractal geometry, corresponding to the Koch snowflake and the Cesaro curve. For the design, we used the CAD computational tool, and afterwards we performed the CAE finite element analysis and verified the thermal behavior of the designed tube. We were able to reduce the heat transfer time and increase the heat flow in the system in the following manner: for smooth tube, 250 W/m2; for Koch surface, 500 W/m2; for six fins, 1450 W/ m2; and for Cesaro curve, 3600 W/m2. These results demonstrate the limits of the design and the advantages of its implementation in machinery such as condensers, heat exchangers, and boilers.spa
dc.description.abstractportuguesOs permutadores de calor estão conformados por tubos com superfícies estendidas, com o propósito de melhorar a transferência de calor entre dois meios, que podem ser um sólido e um líquido em movimento. No presente trabalho expõe-se o desenho que se realizou de um tubo de superfície estendida com geometria fractal, correspondente ao floco de Koch e a curva de Cesaro, com a ferramenta computacional CAD, para logo realizar a análise por elementos finitos CAE e verificar o comportamento térmico do tubo desenhado. Logrou-se obter como resultado reduzir o tempo de transferência de calor e aumentar o fluxo de calor no sistema da seguinte maneira: para tubo liso, 250 W/m2; para superfície de Koch, 500 W/m2; para seis aletas, 1450 W/m2, e, finalmente, para curva de Cesaro, 3600 W/m2. Tudo isto, permitiu evidenciar os limites do desenho e as vantagens que podem chegar a terem relação a sua implementação em maquinarias como condensadores, permutadores de calor e caldeiras.spa
dc.identifier.doihttps://doi.org/10.19053/01211129.v27.n47.2018.7749-
dc.rights.creativecommonsAtribución-NoComercialspa
dc.subject.armarcAlternate energy sources-
dc.subject.armarcDynamical systems-
dc.subject.proposalBoilersspa
dc.subject.proposalCesaro curvespa
dc.subject.proposalFractal designspa
dc.subject.proposalHeat transferspa
dc.subject.proposalKoch Snowflakespa
dc.subject.proposalTubes with extended surfacespa
Appears in Collections:Revista Facultad de Ingeniería

Files in This Item:
File Description SizeFormat 
PPS-875.pdfArchivo principal1.12 MBAdobe PDFThumbnail
View/Open


This item is licensed under a Creative Commons License Creative Commons