Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating

Simple item page
dc.contributor.authorArias Torres, Sandra Milena
dc.contributor.authorGómez Botero, Maryory Astrid
dc.contributor.authorCorrea Bedoya, Esteban
dc.contributor.authorEcheverría Echeverría, Félix
dc.contributor.authorCastaño Gonzalez, Juan Guillermo
dc.date.accessioned2018-09-07T15:09:41Z
dc.date.available2018-09-07T15:09:41Z
dc.date.issued2018-01-15
dc.description1 recurso en línea (páginas 101-110).spa
dc.description.abstractOs recobrimentos autocatalíticos de níquel-boro são utilizados em diferentes indústrias para melhorar as propriedades mecânicas de materiais, como a dureza e a resistência ao desgaste. Nesta pesquisa avaliaram-se as propriedades tribológicas de recobrimentos autocatalíticos Ni-B depositados sobre aço ao carbono AISI/SAE 1018 antes e depois de aplicar um tratamento térmico a 450 °C durante 1 hora. Adicionalmente, realizaram-se ensaios tribológicos por deslizamento em seco, utilizando uma carga de 5 N e uma velocidade de deslizamento de 0.012 m/s, em um tribômetro ball-on-disk fabricado pelo CIDEMAT de acordo com a norma ASTM G99. De acordo com a avaliação tribológica, estabeleceu-se que o tratamento térmico aplicado melhora significativamenteo rendimento tribológico dos recobrimentos autocatalíticos Ni-B.por
dc.description.abstractLos recubrimientos autocatalíticos de níquel-boro son utilizados en diferentes industrias para mejorar las propiedades mecánicas de materiales, como la dureza y la resistencia al desgaste. En esta investigación se evaluaron las propiedades tribológicas de recubrimientos autocatalíticos Ni-B depositados sobre acero al carbono AISI/SAE 1018 antes y después de aplicar un tratamiento térmico a 450 °C durante 1 hora. Adicionalmente, se realizaron ensayos tribológicos por deslizamiento en seco, utilizando una carga de 5 N y una velocidad de deslizamiento de 0.012 m/s, en un tribómetro ball-on-disk fabricado por el CIDEMAT de acuerdo con la norma ASTM G99. De acuerdo con la evaluación tribológica, se estableció que el tratamiento térmico aplicado mejora significativamente el rendimiento tribológico de los recubrimientos autocatalíticos Ni-B.spa
dc.description.abstractNickel-Boron autocatalytic coatings are widely used in several industries to improve mechanical properties of materials such as hardness and wear resistance. Tribological properties were evaluated in Ni-B autocatalytic coatings deposited on AISI/SAE 1018 carbon steel before and after a heat treatment at 450 °C for one hour. Tribological tests were carried out by dry sliding, using a load of 5 N and a sliding speed of 0.012 m/s, in a homemade ball-on-disk tribometer, which followed ASTM G99 standard. According to the tribological evaluation, the heat treatments applied to Ni-B coatings improved their tribological performance. This research corroborates that by applying an adequate heat treatment, hardness and wear resistance of Ni-B coatings can be improved significantly.eng
dc.description.notesBibliografía: página 110.spa
dc.format.mimetypeapplication/pdfspa
dc.identifier.citationArias Torres, S. M y otros. (2018). Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating. Revista Facultad de Ingeniería, 27(47), 103-110. https://doi.org/10.19053/01211129.v27.n47.2018.7927. http://repositorio.uptc.edu.co/handle/001/2160spa
dc.identifier.doi10.19053/01211129.v27.n47.2018.7927
dc.identifier.issn2357-5328
dc.identifier.urihttp://repositorio.uptc.edu.co/handle/001/2160
dc.language.isoengspa
dc.publisherUniversidad Pedagógica y Tecnológica de Colombiaspa
dc.relation.ispartofjournalRevista Facultad de Ingeniería;Volumen 27, número 47 (Enero-Abril 2018)spa
dc.relation.referencesP. M. K. K. Hari Krishnan, S. John, K. N. Srinivasan, J. Praveen, and M. Ganesan, “An overall aspect of electroless Ni-P depositions – A review article,” Metall. Mater. Trans. A, vol. 37(6), p. 10, 2006. DOI: http://doi.org/10.1007/s11661-006-0134-7.spa
dc.relation.referencesG. O. Mallory, and J. B. Hajdu, Electroless Plating: Fundamentals and Applications, Noyes Publ. New York, 1990.spa
dc.relation.referencesB. G. B. Oraon, and G. Majumdar, “Parametric optimization and prediction of electroless Ni-B deposition,” Mater. Des., vol. 28(7), pp. 2138- 2147, Jan. 2007. DOI: http://doi.org/10.1016/j. matdes.2006.05.017.spa
dc.relation.referencesF. Delaunois, and P. Lienard, “Heat treatments for electroless nickel–boron plating on aluminium alloys,” Surf. Coatings Technol., vol. 160 (2-3), pp. 239-248, Oct. 2002. DOI: http://doi.org/10.1016/ S0257-8972(02)00415-2.spa
dc.relation.referencesP. Sahoo, and S. K. Das, “Tribology of electroless nickel coatings – A review,” Mater. Des., vol. 32 (4), pp. 1760-1775, Apr. 2011. DOI: http://doi. org/10.1016/j.matdes.2010.11.013.spa
dc.relation.referencesC. Dervos, J. Novakovic, and P. Vassiliou, “Vacuum heat treatment of electroless Ni–B coatings,” Mater. Lett., vol. 58 (5), pp. 619-623, Feb. 2004. DOI: http:// doi.org/10.1016/S0167-577X(03)00581-0.spa
dc.relation.referencesS. Eraslan, and M. Ürgen, “Oxidation behavior of electroless Ni–P, Ni–B and Ni–W–B coatings deposited on steel substrates,” Surf. Coatings Technol., vol. 265, pp. 46–52, Mar. 2015. DOI: http://doi.org/10.1016/j.surfcoat.2015.01.064.spa
dc.relation.referencesK. Krishnaveni, T. S. N. Sankara Narayanan, and S. K. Seshadri, “Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance,” Surf. Coatings Technol., vol. 190(1), pp. 115–121, Jan. 2005. DOI: http://doi.org/10.1016/j. surfcoat.2004.01.038.spa
dc.relation.referencesT. S. N. S. Narayanan, K. Krishnaveni, and S. K. Seshadri, “Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance,” Mater. Chem. Phys., vol. 82(3), pp. 771-779, Dec. 2003. DOI: http://doi. org/10.1016/S0254-0584(03)00390-0.spa
dc.relation.referencesK. Krishnaveni, T. S. N. Sankara Narayanan, and S. K. Seshadri, “Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance,” Mater. Chem. Phys., vol. 99(2-3), pp. 300–308, Oct. 2006. DOI: http://doi.org/10.1016/j. matchemphys.2005.10.028.spa
dc.relation.referencesD. C. Vitry, and F. Delaunois F., “How heat treatment can give better properties to electroless nickel- boron coatings,” La Metallurgia Italiana. Mons, Belgium, p. 6, 2009.spa
dc.relation.referencesV. Niksefat, and M. Ghorbani, “Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni–B-TiO2 composite coatings,” J. Alloys Compd., vol. 633, pp. 127- 136, Jun. 2015. DOI: http://doi.org/10.1016/j. jallcom.2015.01.250.spa
dc.relation.referencesY. Wang, S.-J. Wang, X. Shu, W. Gao, W. Lu, and B. Yan, “Preparation and property of sol-enhanced Ni- B-TiO2 nano-composite coatings,” J. Alloys Compd., vol. 617, pp. 472–478, Dec. 2014. DOI: http://doi. org/10.1016/j.jallcom.2014.08.060.spa
dc.relation.referencesE. Correa, Direct deposition of electroless Nickel- Boron coatings on magnesium alloys, Universidad de Antioquia, Medellín, 2013.spa
dc.relation.referencesASTM, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. United States, 2017, p. 6.spa
dc.relation.referencesV. Vitry, Electroless nickel-boron deposits: Synthesis, formation and characterization; Effect of heat treatments; Analytical modeling of the structural state, Université de Mons, Bélgica, 2009.spa
dc.relation.referencesA.-F. Kanta, V. Vitry, and F. Delaunois, “Wear and corrosion resistance behaviours of autocatalytic electroless plating,” Journal of Alloys and Compounds, vol. 486 (1-2). pp. L21-L23, Nov. 2009. DOI: http://doi.org/10.1016/j.jallcom.2009.07.038.spa
dc.rightsCopyright (c) 2018 Universidad Pedagógica y Tecnológica de Colombiaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2spa
dc.rights.creativecommonsAtribución-NoComercial 4.0 Internacional (CC BY-NC 4.0)spa
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/spa
dc.sourcehttps://revistas.uptc.edu.co/index.php/ingenieria/article/view/7927/6274spa
dc.subject.armarcAutocatalytic coatings
dc.subject.armarcPhosphate coating
dc.subject.proposalElectrolessspa
dc.subject.proposalHeat treatmentspa
dc.subject.proposalNi-B coatingspa
dc.subject.proposalTribological propertiesspa
dc.titleEffect of heat treatment on the tribological properties of Nickel-Boron electroless coatingspa
dc.title.alternativeEfecto del tratamiento térmico sobre las propiedades tribológicas del recubrimiento autocatalítico níquel-borospa
dc.title.alternativeEfeito do tratamento térmico sobre as propriedades tribológicas do recobrimento autocatalítico níquel-borospa
dc.typeArtículo de revistaspa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.coarversionhttp://purl.org/coar/version/c_970fb48d4fbd8a85spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttps://purl.org/redcol/resource_type/ARTspa
dc.type.versioninfo:eu-repo/semantics/publishedVersionspa
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
PPS_882_Effect_of_heat_treatment.pdf
Size:
1.03 MB
Format:
Adobe Portable Document Format
Description:
Archivo principal
Descargar
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
14.45 KB
Format:
Item-specific license agreed upon to submission
Description:
Descargar
Collections
Revista Facultad de Ingeniería